Garmin workout pace targets missing or showing "No target": how to fix it
When a Garmin workout shows "No target" where a pace should be, the target was usually lost before it reached the watch. First open the workout in Garmin Connect: if the pace is missing there too, it was lost on the way in. The common causes are an unset threshold pace in Intervals.icu, a step that asked for pace and heart rate together, a FIT import that strips pace, or a pace written only in the step's note. If Connect shows the pace but the watch doesn't, re-sync and check the watch's firmware.
Step 1: find where it went missing
Open the workout in Garmin Connect, on the website if you can (it shows every step's target clearly), and look at a work step.
| Garmin Connect shows | The watch shows | Where it was lost | Go to |
|---|---|---|---|
| No target | No target | On the way into Garmin: the app or file that sent it | Causes 1–4 |
| The pace in the step's note, no target | Note text only | The sender wrote pace as text | Cause 4 |
| The pace range | No target, or a single pace | On the watch side: sync or firmware | Cause 5 |
| The pace range | The pace range | Nothing lost; the watch's data screen may hide it | Cause 6 |
The common causes, and fixes
1. Intervals.icu without a threshold pace
Intervals.icu writes running targets as a percentage of your threshold pace. If threshold pace isn't set for running in your sport settings, there's nothing to convert from, and the steps go to Garmin with no target, while looking right in Intervals.icu's own workout view (Intervals.icu forum, another thread). Fix: set your running threshold pace in Intervals.icu's settings, then send the workout again.
2. Pace and heart rate on the same step
A Garmin running step carries one target. A step written as "5:00/km, HR under 165" can't keep both, and depending on the tool one is dropped. Runners report externally made workouts that lose pace while heart-rate targets survive (Garmin forum). Fix: pick one target per step, usually pace for reps and heart rate for easy running, and put the other in the step's note.
3. FIT file import
Some routes for importing a FIT workout file strip pace targets (Intervals.icu forum). Fix: send the workout through an app on Garmin's Training API instead, or rebuild the targets in the Garmin Connect workout builder.
4. The pace is only in the note
Some tools put "4:55–5:05/km" in the step's description and leave the target empty. The watch shows the text, but won't alert you when you're off pace (Intervals.icu forum). Fix: edit the step in Garmin Connect and set a pace target, or use a tool that sets the target itself.
5. Connect has it, the watch doesn't
- Sync again with the watch next to the phone. A workout edited after it synced may still be the old copy on the watch.
- Remove the workout from the watch's list and sync to download it fresh.
- Update the watch's firmware. At least one runner reported a Fenix 8 showing a single average pace in place of the range after a firmware change; that's a device issue, not the workout.
- Garmin Connect itself has had display bugs: runners once reported Connect web not showing pace on Coach plans (Garmin forum). Check the app and the website.
6. The target is there, but hard to see
The watch's workout screen shows the target range, but your favorite data screens may not. Scroll through the workout's screens during a run, or add a lap pace field. If the target alerts feel random, the range may be too narrow for instantaneous pace: see how wide to make a pace range.
Catching it before the run, every time
Most of these failures are silent: the tool says "sent", and you find out mid-rep. PaceRunner sends through Garmin's official Training API, sets pace as a real target on every work step (never only a note), and after Garmin accepts the workout, reads Garmin's copy back and compares every step with what you saw: type, length, target, repeat count and the calendar day, allowing only for rounding (half a second per km on pace ranges).
- A target that came back empty is flagged as a mismatch on its step ("Garmin dropped the target"), before you run it.
- A step that asked for pace and a heart-rate cap keeps pace as the target and puts the cap in the note, and tells you it did.
- If Garmin can't be read back, the send says so; it's never shown as checked.
Type15 min easy, 5 x 1 km at 10K pace with 2 min jog, 10 min easy
What read-back checks is Garmin's copy. A watch that displays a stored target wrongly (the firmware case above) is outside what any sender can see.
Questions
- Why does my Garmin workout say "No target"?
- The step reached Garmin without a target. Usually the sending tool dropped it: an unset threshold pace in Intervals.icu, two targets on one step, or a FIT import. Check the workout in Garmin Connect to confirm.
- Can a Garmin running step have pace and heart rate targets?
- No, one target per running step. Use one as the target and write the other in the step's note.
- My Intervals.icu workout looks right but Garmin has no pace. Why?
- Set your running threshold pace in Intervals.icu's settings. Its pace targets are a percentage of threshold, and without one they reach Garmin empty.
- Does PaceRunner check the targets on my watch?
- It checks Garmin's copy of every step and target after each send. What the watch displays after syncing is up to the watch.
Checked November 18, 2026